This section of the Properties dialog box, accessed by right-clicking a component in the floor layout in Planning> Data Center, provides relevant information that identifies the energy efficiency values of the selected component. It is also available as read-only information by right-clicking a component in an energy system in > Planning> EE Configuration.
Derate Capacity fraction |
Identifies the usable fraction of the nameplate value that can be used for this component. For example, if you use a 20% safety margin, this value would be 0.8. |
Redundancy |
Identifies the redundancy of this component. For example, if you have a redundant setup with two 80 kW UPS, this value would be 2N. |
Redundancy "+1" kW Increment |
Identifies the loss in kilowatt caused by internal redundancy. (Only needed if redundancy option includes +1.) For example, if you have a 40 kW UPS with one spare 10 kW power module, this value would be 10 kW. |
Typical PU |
Identifies the power usage (PU) of this component relative to the total power usage. |
Usable fraction of nameplate w/o derating |
Identifies the usable fraction of power that can be used without derating the value. |
Fixed loss |
Identifies the fraction of power that is the fixed loss of the component. |
Proportional loss |
Identifies the fraction of power that is lost proportional to the load of the component. |
Square Law loss |
Identifies the fraction of power that is lost proportional to the square of the load of the component. |
Dry Bulb Fixed loss |
Identifies the fraction of power that is lost per degree Celsius dry bulb. |
0 comments
Please sign in to leave a comment.